Highly Efficient Armature Casting Machine Aluminum Liquid Die Casting Machine
The conventional rotor die casting machine requires about 3-5 operators for one machine. However, for our rotor die casting machine, one people can take care of more than one machines. It only takes one day for green hands becoming practician. It greatly reduced labor cost.The tooling change is also fast. it takes about 10min to change mould.
Unlike the conventional die casting machine, our machine doesn't need asbestine cup to keep the temperature and demould. The adpotion of automatic solid lubricating system and demould oil adding system makes the whole production smokeless , tasteless , pollution free and clean.
it adpots a C type structure. During production, there’s no need for operator to work under the projection area. Meanwhile, operator does not need to handling the heavy tooling which might occur body injury, and the machine has aluminium anti spatter design to prevent the aluminium liquid from spraying and cause injury.
This armature die casting machine is consisted of main machine and hydraulic electronic control system .
1.Main cylinder mould locking system
2. injection system
3. residual aluminum(sprue)pushing and conveying mechanism
4. automatic demould oil spraying
5.lower mould cooling system
6. lubricating system of puncher pin and molten aluminum container
7.Lower mould rotation system
8. Mould assembly system
9.Hydraulic system and electronic control system
10. Aluminum liquid loading system
11.Mechanical arm
12. Loading system
Technical Parameters
| NO. | Item | Unit | 90T |
| 1,Main cylinder: |
| 1 | main cylinder mold lock force | KN | 500 |
| 2 | main cylinder mold lock travel | mm | 400 |
| 2,Injecting cylinder: |
| 1 | Injecting cyliner travel | mm | 150 |
| 2 | Injecting cylinder injecting force | KN | 300 |
| 3 | Injecting force(Min-Max) | KN | 70-300 |
| 4 | capacity | L | 20 |
| 5 | aluminum depot OD(Max) | mm | 75-90 |
| 6 | punching head OD(Max) | mm | 75-90 |
| 7 | aluminum depot capacity(Max) | KG | 1.8 |
| 8 | Injection punching head travel distance | mm | 55 |
| 9 | cycle time | S | 15-20 |
| 10 | Rotor OD | mm | MAX85 |
| 11 | Rotor stack height | mm | MAX90 |
| 3,Motor and pump: |
| 1 | Pump motor power | KW | 7.5 |
| 2 | Divider motor powder | KW | 0.75 |
| 3 | Oil pump (plunger pump) | L | 40Y |
| 4,Machine dimesion: |
| 1 | Main frame(L*W*G) | mm | 1800*1800 *2500 |
| 2 | assembly of oil tank and electric appliance(L*W*G) | mm | 1500*1000 *900 |
| 3 | turntable OD | mm | 1000 |
| 5,Cooling pump specification: |
| 1 | Submersible pump power | KW | 1.5 |
| 2 | Submersible pump rate of flow | M3/H | 5 |
| 3 | Submersible pump water pressure | MPa | 0.4 |
| Remark: the max pressure of this machine is 25Mpa Submersible pump power : 220/380V Optional |
Armature die casting machine production process diagram:
Click below picutre to view the vidio.
Product Tags:
|
|
Highly Efficient Armature Casting Machine Aluminum Liquid Die Casting Machine Images
|
